PACKAGE INCLUDES:
1 x 3-1/2" Large Dial Pressure Gauge
1 x 15"L Long Hose with Drain hose
1 x 8"L Short Hose
13 x Adapters
1 x Tee Fitting (Aluminium tee parts 1/4" & 3/8" barbed x 1/8"-24NPT & brass parts 1/8"-27NPT x 1/4"-18NPT)
1 x Cut Hose (1/4" I.D. x 3-1/2"L)
1 x Cut Hose (3/8" I.D. x 3-1/2"L)
2 x Hose Clamps
1 x Red Blow Molding Case （15"L x 11"W x 3"H）
Fitting size（The same as the picture we showed）:
1# Adapter: M12 x 1.5//7/16-20 UNF
2# Adapter: M12 x 1.25//7/16-20 UNF
3# Adapter: M12 x 1.5//7/16-20 UNF
4# Adapter: M8 x 1//7/16-20 UNF
5# Adapter: M14 x 1.5// M12 x 1.5
6# Adapter: M12x1.5//M10 x 1
7# Adapter: M14x1.5//M12 x 1.5
8# Adapter: M12 x 1.5//M8 x 1
9# Adapter: M12 x 1.5//M8 x 1
10# Adapter: M12 x 1.5//M8 x 1
11# Adapter:7/16-20//7/16-20 UNF
12# Adapter:7/16-20 UNF
13# Adapter:M8 x 1&//7/16-20 UNF
14# Adapter: Size 6
15# Adapter: Size 8
16# Adapter: Size 10-16
17# Adapter:Straight rod M12x 1.5
18# Adapter:M14x 1.5/ M12 x 1.5 bending bar
FEATURE:
1. The fuel pressure test gauge set is equipped with various fittings and hoses for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump; 8"L hose for M6 fuel pressure test port; there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail.
2. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles.To use it on petrol engines you will have to use either the t-piece after the fuel filter or find a cap in the fuel that one of the adapters will fit.
3. Components fitted with quick coupling system and safety valve to prevent inadvertent discharge of fuel under pressure.
4. Pressure release valve with drain hose for safe fuel recovery.
NOTICE:
1.It's better to wear gloves and goggles when use it.
2.Choose a well-ventilated, outdoor location.Don't smoke or test near open flames or a source of electrical sparks, due to the Gasoline is highly flammable. Don't allow gasoline to contact with the hot manifolds or other engine components.
3.Before making connections and testing, put a dry chemical (Class B) fire extinguisher nearby.
4.Always refer to equipment manufacturer's operation instruction, compared with the manufacturer's recommended readings.
5.Make sure all connections are tight to avoid fuel leaks. Or use PTFE tape if it's necessary.
