This is a small (50ml) flexible pot of 'Stovax Thermic Seal - High Temperature Rope Adhesive', but it will go a long way (5-10+ metres?). Received in December it was v. cold so left it 24 hours on mantlepiece. Ignore shaking, knead bottle with fingers and invert (it may not flow down inside the bottle even then). I snipped the top off the nozzle and squeezed to the point the nozzle was full and delivered a bit of grey cream-like texture onto a piece of scrap (after a drop or two of liquid), closed top and kneaded again, but I don't know that this was even necessary. Cleaned groove with a wire brush and then dry rag. Only a small line of creamy grey glue was needed and I may have used more than necessary, slightly clogging the weave of the rope. Avoid tendency to stretch the rope as you introduce it into the groove. Closed stove door and lit up so that it heated up steadily over half an hour as advised. Appears to be very effective indeed. Not sure how well it will keep once opened.
| Item volume | 50 Millilitres |
|---|---|
| Batteries required | No |
