���غ���

• Lifetime Software Updates: Easily update with one-click over Wi-Fi to access new features, support for more vehicles, and improved performance.
• 31 Advanced Maintenance Resets: Access 31 commonly maintenance functions, like ABS Bleeding, Oil Reset, Injector Coding, A/C Relearn, Power Balance, TPMS Reset, HV Battery, and more, all from the "Special Function" menu.
• ECU Configurations: Also known as "Flash Hidden Functions", this feature lets you customize certain vehicle models. Compatible for BMW, for VW, for Audi, for Skoda, for Toyota, for Lexus, for Scion, for Mazda, for Ford, and for Lincoln. (Note: Does not support ECU coding or programming.)
• OE-Level Full System Diagnosis: Perform comprehensive diagnostics for all available systems on your vehicle, including reading/clearing trouble codes, viewing live data streams (in text and graph formats), retrieving freeze frame data, and reading ECU information. (Note: No bidirectional control.)
• 8-PIDS-1 Live Data Graphing: combine 8 PIDs in one graphing to check the work status of modules, include emission, misfire, O2 sensor data, MAP/TPS value, mass airflow, clutch sensors, water/trans oil/coolant/fuel temp, cylinder balance rates, long/short fuel trim, engine rpm, battery voltage, wheel speed sensor, fuel rail pressure, etc., support data record/playback. Export live data streams to CSV files for further analysis or view them later in "Data View''.
• CAN FD/DOIP Protocol Support: Enhances data transfer rates and no need for additional adapters, saving a lot. Work on GM, on GMC, on Chevrolet, on Cadillac, on Buick, on Holden, and on Hummer vehicles from 2020 onwards.
• Auto VIN & Scan 2.0: Automatically identify vehicle information, retrieve the VIN, and conduct comprehensive system diagnostics up to 5 times faster. Compatible with CAN vehicles from 2005 onwards. With 4-Ways to detect vehicles by Auto Scan/Manual Input VIN/Automatic Detection/Manual Selection.
• Broad Vehicle Coverage & 15+ Language Support: Supports over 10,000 vehicle models from America, Asia, Europe, Australia, and China, with coverage expanding through irregular updates. Supports 15 languages. with your S/N to switch to your preferred language.
• ALL 10 Modes OBD2 Functions: O2 Sensor monitoring test, I/M Readiness, Component test, On-board Monitor Test (Mode 06), retrieve ECU information, read codes, clear codes, data stream display, freeze frame, etc.
• Premium Hardware: Features a 7.0-inch touchscreen with 1024×600 resolution, Android 10.0 OS, 2 GB RAM + 64 GB ROM, 5000 mAh battery, and dual-frequency Wi-Fi (2.4GHz & 5GHz).

• ECU Configurations(Flash Hidden Functions): Unlock hidden features and customize your car with ECU Configuration function.
• Oil Reset: Reset the service and zero oil light once changed the oil.
• ABS Bleeding: Cycle the ABS pump to bleed the air out of the ABS to restore the braking sensitivity.
• Throttle Relearn: After clearing or repairing the electronic throttle, re-learning and adapt throttle sensor position.
• EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired or replaced.
• TPMS Reset: Perform tire pressure reset after replace the tire or sensors when the tire pressure is insufficient.
• Gearbox Match: Reset the adaptive shifting points to match the gearbox after replacing.
• BMS Reset: Reset the monitoring unit of the car battery after replacement.
• Injector Coding: Write the new injector code into ECU to correct cylinder injection quantity.

XTOOL IP616 automotive diagnostic tool also comes with functions like: HV Battery, EGR Relearn, A/C Relearn, Gear Learning(Crankshaft Relearn), Power Balance, Suspension, Headlight Adjustment, Seat Match, Tire Upgrade, Airbag Repair(SRS), Windows Initialization, EEPROM, Electronic Pump Activation, A/F Reset, Start/Stop Reset, Language Change, Transport Mode, etc.