Decent tap for the money which includes 2 flexible hose connectors. It’s made of very thin metal so very light weight but this was as expected for the price. Once fitted though, it looks good and seems solid.
The base of the tap is connected to the sink using a more standard oval threaded brass ring with 2 rubber washers and a nut, 35mm diameter and around 100mm long, so should fit most basins or vanity units.
I managed to tighten this nut with enough pressure by hand but if not then you’ll need a spanner or wrench to knip this up underneath. The connectors are a decent length, one end threads into the bottom of the tap and the other has a simple 15mm nut which would connect to your hot and cold water inlet pipes under the sink. if the old fittings you removed here don’t have the same connections as the new ones then you’ll have to buy and fit a separate push fit or compression fitting to make the connection.
Hope this helps.
| Manufacturer | Hapilife |
|---|---|
| Part Number | KT04A |
| Package Dimensions | 36.1 x 20 x 10.2 cm; 997.9 g |
| Item model number | KT04A |
| Size | Tap-04A |
| Colour | Chrome |
| Style | Contemporary or Transitional |
| Finish | chrome, Brass |
| Material | Stainless Steel |
| Installation method | Single Hole |
| Item Package Quantity | 1 |
| Number of Pieces | 5 |
| Flow rate | 3.79 Litres Per Minute |
| Hose Length | 400 Millimetres |
| Number Of Holes | 1 |
| Spout height | 205 Millimetres |
| Handle/lever placement | Single Hole |
| Number of handles | 1 |
| Handle material | Brass |
| Plug profile | Deck Mount |
| Special Features | Advanced Chrome Finish, Sturdy Stainless Steel Construction |
| Included Components | Lever |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 998 g |
