ÍøÆغÚÁÏ
Customer Review
- Reviewed in the United Kingdom on 25 September 2023This is a superbly constructed TV bracket. I have a 55" Sony TV on mine and it barely deflects a millimetre at full extension. My TV is at 90 degrees to the wall and there is still at least 30cm between the side of the TV and the wall. I would guess that there would still be room if it was a 65" TV too.
The hardware supplied is great. I have old flint block walls that can be granite hard and powder soft at random points. I used a 10mm masonry bit even though they were 12mm wall plugs and that worked fine. If you're confident the wall you dril into is a modern, uniform material then use a 12mm bit. Anyway, the 6 supplied bolts and washers work very well.
Supplied with the bracket was the usual collection of bolts and washers for attaching your TV. It was a bonus though to have an HDMI cable and several velcro cable ties supplied too.
The only issue I had was when it came to levelling the TV once in position. No matter how perfectly level you mount the bracket to the wall, the TV will always come out of level when at full extension. This is why there is a +/- 3 degree adjustment to compensate. Now, your bracket may be different, but the four Allen bolts you loosen to allow adjustment on mine were tightened in the factory to an exceptional torque rating! I'd never rounded off an Allen wrench before...I have now! Perhaps the quality of the supplied wrench was below par but, even so, my fingers had a wrench shaped indentation on them for quite a while afterwards. I had to use a Wera set I have and my cordless drill to loosen a couple that were too rounded off to do by hand. So, I suggest you loosen those 4 bolts before you've mounted it to the wall. It will save a lot of bother.
In summary, then. A superb product you can trust your precious and expensive gogglebox with. Just check the torque on those bolts first. Recommended. :)
